|
| |
para 4-63
TM5-4120-377-14
5-4 EVAPORATOR AND CONDENSER FAN MOTOR (B2) REPAIR KECO MODEL F18T4-2S
Figure 5-1.
Evaporator and Condenser Fan Motor (KECO Model F18T4-2S)
See paragraph 4-63 for testing (installed), removal, and installation.
a. Authorized repairs. Direct support maintenance repair of the fan motor is limited to the replacement of
electrical plug, thermostat (thermal overload), bearings, rotor with shaft, and hardware items.
b. Disassembly. Disassemble motor only as necessary to do required repair. (See figure 5-1.)
(1) To replace connector (J12):
(a)
(b)
(c)
(d)
(e)
(f)
Using screwdriver, remove four screws from terminal box.
Remove terminal box.
Remove four screws from connector (J12).
Pull connector away from terminal box as far as wires will allow.
Tag and unsolder leads.
Remove old connector.
5-4
Change 1
|
