|
| |
TM5-4120-377-14
(2) Soften and remove old adhesive and gasket residue, using acetone or methyl-ethyl ketone (MEK) and a
stiff brush.
(3) Coat the mating surfaces of the metal and gasket with adhesive. Let both surfaces air dry until the
adhesive is tacky but will not stick to fingers.
NOTE
An initial supply of adhesive is supplied as item 3, Section II, Expendable Supplies and
Material List. (See Appendix E.)
(4) Starting with an end, carefully attach the gasket to the metal. Press into firm contact all over.
5-59/(5-60 blank)
|
