|
| |
TM 5-4120-377-14
NOTE
Retain all items removed from unit. Store in a safe place. Parts must be reinstalled prior to
return to supply. For a list of required items, see Appendix C.
4-6.
AIR CONDITIONER PREPARATION FOR INSTALLATION
a. General. No preparation is necessary if the air conditioner is to be installed by the typical exterior wall
opening method and operated as a self-contained unit. For alternate installation methods, some preparation is
necessary.
b. The unit is designed to provide for several basic types of installation. See the following paragraphs for
instructions only if they are applicable to your requirements.
(1) Remote mounting of control panel. (See para 4-7.)
(2) When power and/or control cable(s) are to be connected through the return air duct, see paragraph
4-8.
(3) Alternate input power cable connector locations. (See para 4-9.)
(4) Installations that require removal of the fabric cover. (See para 4-10.)
4-7.
REMOTE MOUNTING OF CONTROL PANEL
This paragraph is applicable only when the control panel is to be remote mounted. If the control panel is to be
removed from the unit and installed in a remote location, follow instructions of this paragraph.
Be sure input power is disconnected before doing any work inside air conditioner cabinet.
Voltages used can be lethal.
a. Using screwdriver, loosen two captive panel fasteners in lower front panel.
Figure 4-3. Lower Front Panel
TS4120-377-14/4-3
4-10
|
