 |
|||
|
|
|||
|
Page Title:
CONDENSER AIR DISCHARGE LOUVER AND LINKAGE-Continued. |
|
||
| ||||||||||
|
|
 TM 5-4120-386-14
--
4-21. CONDENSER AIR DISCHARGE LOUVER AND LINKAGE-Continued.
LOCATION/ITEM
ACTION
REMARKS
Disassembly
a.
3. Condenser
Remove five push nuts (9).
Louver
Remove four screws (10).
b.
c.
Remove bearing plate (11).
d.
Remove five louver blades (12)
and ten bearings (13) from
louver assembly frame (8).
Repair & Clean
4. Condenser
Replace damaged louver blades,
a.
Louver
bearing, lever, or insulation.
b. Straighten, or replace, bent
frame.
Clean parts in a well ventilated
area. Avoid inhalation of solvent
fumes and prolonged exposure of
skin to cleaning solvent. Wash
exposed skin thoroughly. Dry cleaning
solvent, P-D-680, used to clean parts
is potentially dangerous to personnel
and property. Avoid repeated and
prolonged skin contact. Do not use
near open flame or excessive heat.
Flash point of solvent is l00oF
to 138 oF (38oC to 58oC )
c.
Clean with dry cleaning solvent.
Assembly
5. Condenser
Install ten bearings (13) and five
a.
Louver
louver blades (12) into louver
assembly frame (8).
b. Install bearing plate (11) to
louver assembly frame (8) by
securing four screws (10).
c. Install five push nuts (9).
4-34
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals