 |
|||
|
|
|||
|
Page Title:
CONDENSER COIL ASSEMBLY - INSPECT/SERVICE. |
|
||
| ||||||||||
|
|
 TM 5-4120-386-14
4-38. CONDENSER COIL ASSEMBLY - INSPECT/SERVICE.
This task covers:
Inspection
a.
b. Cleaning
INITIAL SETUP
Equipment
Special Tools
Condition
Tool Kit SC 5180-90-CL-N18
Para
Condition Description
Condenser Guard removed.
LOCATION/ITEM
ACTION
REMARKS
Inspection
Check to be sure power is
a.
disconnected.
b . Check for accumulated dirt.
Clean if an accumulation of
dirt is evident.
c. Check fins for dents, bent
edges, or any condition that
would block or distort air
flow. Straighten all damaged
fins with a plastic fin comb.
Compressed air used for cleaning
purposes will not exceed 30 psi
(2.1 kg/cm2).
Do not use steam to clean coil.
Cleaning
Clean coil with a soft bristle
brush, vacuum cleaner and brush
attachment, or use compressed air
at 30 psi or less from the inside
of the unit to blow the dirt out.
Take care to avoid fin damage. When
using compressed air, wear safety
glasses or goggles. Dirt can be blown
into your eyes.
4-105
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals