|
| |
TM5-4120-387-14
(5) U s i n g
with two washers
(6) Using
wrench and screwdriver, secure ground wires on grounding stud
and nut.
screwdriver,
secure junction box cover to junction box with four
. .
panel fastener screws.
(7) Position loop clamps on cable assembly.
(8) Install lower end fitting on cable as shown in figure 4-25.
(9) Using screwdriver, secure loop clamps to junction box.
(10) Connect electrical plugs P4, P8 and P1O.
(11) Position junction box in unit.
(12) Using screwdriver, secure four panel fastener screws in flanges of
junction box.
Follow-on procedure: 1.
2.
Install lower panel.
(See para 4-24.)
Connect power cord.
4-30. TRANSFORMER(T)
Preliminary procedure:
Remove junction box.
Figure 4-26. Transformer (T)
4-74
|
