|
| |
TM5-4120-387-14
e.
Installation
(1) Place actuator arm into position and insert toggle shaft.
(2) Using screwdriver, install circuit breaker and circuit breaker cover
with four screws, lockwashers, and flat washers.
(3) Using tags and wiring diagram (fig. 4-7) connect leads with spade type
terminals.
(4) Using screwdriver, install junction box cover with four panel fastener
screws.
Follow-on procedure:
Install junction box. (See para 4-29.)
4-33. FUSES (F1 and F2)
Preliminary procedure: Remove junction box.
(See para 4-29.)
Figure 4-29. Fuses (F1 and F2)
4-80
|
