|
| |
TM5-4120-387-14
b.
Removal
(1) With screwdriver, remove one screw on bracket on right side of junction
box .
(2) With screwdriver, remove two screws on bracket in rear of junction box.
Figure 4-32. Time Delay Relay (K9)
(3) Extend relays and bracket from junction box, taking care not to damage
leads.
(4) Tag and disconnect wire leads from relay (K9).
(5) With screwdriver and wrench, remove the four screws and self locking
nuts on bracket.
(6) Remove relay (K9).
c.
Inspection
(1) Check relay for cracks, evidence of overheating, and any other visible
damage.
Repair if damaged.
4-87
|
