|
| |
TM5-4120-387-14
a.
Inspection/Test
(1) Check connectors for general condition and loose, broken, or missing
contacts.
Replace damaged connectors.
(2) Check individual wires for loose solder connections, loose terminal lug
connections, cut or frayed insulation, and cut or broken wires.
(3) See wiring diagram (fig. 4-7) and continuity test individual wires.
Repair or replace wires with no continuity.
b.
Repair
(1) See paragraph 4-27 for general wire repair instructions.
(2) See table 4-3 (Wire List) for wire lengths and terminal/connector
information.
c .
Removal/Installation. See figure 4-39 for removal/installation information.
Follow-on procedures: 1.
Install top panel.
(See para 4-23.)
2.
Install air intake grille. (See para 4-19.)
3.
Install air filter.
(See para 4-25.)
4.
Install junction box.
(See para 4-29.)
5.
Install condenser air discharge guard. (See
para 4-20.)
4-100
|
