|
| |
TM5-4120-387-14
d.
Installation.
(1)
Rotate motor bracket and motor in opposite direction until motor and
motor junction box clear motor bracket and place motor into unit.
(2) Install eight screws to install motor bracket to housing.
(4) Aline motor flange hole pattern to motor mount flange hole pattern.
(5) Install the four screws and washers in the motor mount flanges,
(6) BY hand, tighten the four self-locking nuts on the four screws,
(7) Insert the two spacers in motor bracket and aline with holes,
(8) By hand, tighten two screws,
lock washers and flat washers in
bracket.
motor
(9) Using two wrenches, tighten the four screws, washers, and self-locking
nuts in motor flange,
(10) Using wrench, tighten the two screws, lock washers and flat washers in
motor bracket.
Follow-on procedure:
1. lnstall condenser
2.
Install evaporator
fan.
(See para. 4-59. )
and ring, (See para 4-58.)
4-61. EVAPORATOR COIL CLEANING
Preliminary procedure:
Remove mist eliminator.
(See para 4-26. ]
Voltages used can kill.
Always disconnect power cord to air
Conditioner before performing any internal maintenance.
Shutting unit off at its control panel does not disconnect
unit power.
Change 3
4 - 1 4 5
|
