|
| |
TM5-4120-387-14
(4) Remove bracket, spacer and gasket.
(5) While purging the system with nitrogen, debraze the tubing. (See para
5-7 and 5-8.)
(6) Remove liquid sight indicator.
c.
Installation
NOTE
Do not disassemble liquid sight indicator.
(1) Position liquid sight indicator on tubing.
(2) While purging the system with nitrogen, braze the tubing joints. (See
para 5-7 and 5-8.)
(3) With screwdriver, install bracket, spacer and gasket with two screws
and washers.
(4) Replace the dehydrator. (See para 5-13.)
(5) Replace charg
(6) Leak test all
para 5-9.)
ing valves.
(See para 5-17.)
newly connected joints and those in the repair area. (See
(7) Evacuate and charge the refrigerant system. (See para 5-10 and 5-11.)
Follow-on procedure: 1. Install fan relay (K7). (See para 4-54.)
2.
Install top panel.
(See para 4-23.)
5-57
|
