|
| |
(5) Purge the system with nitrogen
paras 5-7 and 5-8.)
(6) Remove the receiver.
c.
Installation
(1) Using wrench and screwdriver,
lockwashers and nuts each on two receiver
(2) Place the receiver on the tube
TM5-4120-387-14
and debraze the tube connections.
(See
loosely secure receiver with two screws,
clamps.
ends, purge the system with nitrogen,
and braze the tube joints.
(See paras 5-7 and 5-8.)
(3) Using a screwdriver, secure the two receiver clamps to the casing side
panel with two screws and lockwashers each clamp
(4) Using screwdriver and wrench, tighten
(5) Replace the dehydrator. (See para 5-13.)
two clamps on receiver.
(6) Leak test all newly connected joints and those in the repair area. (See
para 5-9.)
(7) Evacuate and charge the refrigerant system. (See paras 5-10 and 5-11.)
Follow-on procedure:
Install junction box. (See para 4-29.)
5-69
|
