|
| |
TM5-4120-387-14
6-4. LIFTING HANDLES
a.
Removal
(1) Using a drill bit slightly smaller than the rivet diameter, drill out 12
blind rivets that secure each lifting handle to adapter plates.
(2) Remove handle(s).
(3) If adapter plate is to be replaced:
Use a drill bit slightly smaller than the diameter of the rivet body to
drill out 16 blind rivets.
Remove adapter plate(s).
b.
I n s t a l l a t i on
(1) Aline 16 holes of adapter plate with 16 holes in side panel.
(2) Secure each adapter plate with 16 blind rivets.
(3) Aline 12 holes of lifting handle with 12 holes in adapter plate.
(4) Secure each lifting handle to adapter plate with 12 blind rivets.
Figure 6-1. Lifting Handles
6-2
Change 1
|
