|
| |
TM5-4120-387-14
(2) Check that fabric cover has been unsnapped, rolled up, and secured with
both straps to the two turnbutton fasteners.
Figure 2-3. Fabric Cover
Under normal operating conditions, before starting the air
conditioner in any mode, make sure that the fabric condenser
cover on the back of the condenser section is rolled up and
secured and that all screens and guards are in place and
unobstructed.
Under extreme cold climatic conditions, such as blowing snow,
or freezing rain which might enter and damage condenser
section, the unit may be operated in the VENTILATE, LO HEAT,
or HI HEAT modes with the fabric cover rolled down and
snapped in place.
2-16
|
