|
| |
TM5-4120-387-14
TABLE 3-1. TROUBLESHOOTING (Cont.)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 2.
Check to be sure condenser air inlet and outlet are not obstructed.
Remove obstructions.
Step 3.
Reset (PUSH) PRESSURE CUT-OUT switch(es) and restart unit.
If unit does not start notify your supervisor and Organiza-
tional Maintenance.
Step 4.
Check to be sure that condenser fan is operating.
(Air being
discharged from condenser air outlet.)
If fan is not operating, shut unit off and notify your
supervisor and Organizational Maintenance.
3-6
|
