|
| |
TM5-4120-387-14
Be sure that the protective electrical connector cover which
was removed from the rear panel is reinstalled at the new
location.
g.
Install gasket and cover plates over connector hole patterns at bulkhead and
rear panel.
h.
Coil loose excess harness so that it will not be damaged.
Follow-on procedure:
Install junction box.
(See para 4-29.)
4-8. INSTALLATIONS THAT REQUIRE REMOVAL OF FABRIC COVER
Some installations require removal of the condenser side fabric cover. This
generally applies only when the air conditioner is positioned inside with conden-
ser and fresh air openings ducted to the outside.
NOTE
If air conditioner is to be installed with condenser side
(rear) exposed, the fabric cover should be left in place if
possible.
4-11
|
