4120-01-238-4277">
|
|
TM 5-4120-393-14
4-24. Lower Front Panel
This task covers:
a. Removal
b. Inspection
c. Replace
d. Installation
Initial setup.
Tools:
Tool kit, service, refrigeration unit NSN 5180-00-596-1474
Personnel: 1
Equipment condition:
Turn unit power off at power source. If there is a chance that it will be turned on, also disconnect power cable
to air conditioner.
General Safety Instructions:
WARNING
Disconnect input power to the air conditioner before performing any internal
maintenance. Voltages used can KILL. Shutting the unit off at the control panel
does not disconnect unit power.
REMOVAL
1.
Using screwdriver, loosen three captive panel fasteners (1).
2.
Remove panel (2). Tilt top of lower front panel out and lift panel up to remove.
INSPECTION
1.
Check that panel is not bent, cracked, or punctured.
2.
Check that gaskets and insulation are not tom, loose, or missing.
3.
Check that information plates are readable and in place.
4.
Refer repair of panel, gaskets, and insulation to Intermediate Direct Support Maintenance.
4-51
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |