 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-4120-393-14
5-5.1. Evaporator Fan Motors (B3A and B3B) (Reliance Electric Model) (F60T-2HS Only) (cont)
Figure 5-5.1. Evaporator Fan Motor
e.
Remove tags.
f.
Secure cable clamp (2).
3.
To replace thermostat:
a.
Match-mark motor frame and stator (3) and both end shields (4) and (5) to ease reassembly.
b.
Using screwdriver and wrench, remove four studs (6), nuts (7), and lock washers (8).
c.
Carefully separate end shield (4) from motor frame (3). Use a brass or plastic bar and hammer and tap end
shield away from motor frame. Tap opposite sides, top, and bottom in alternating sequence to break end shield
loose.
d.
Pull end shield (4) away from motor far enough to gain access to thermostat (9).
e.
Pull thermostat (9) away from motor.
f.
Tag and disconnect leads to the thermostat (9).
g.
Remove old thermostat (9).
h.
See tags and connect leads to new thermostat (9).
i.
Remove tags.
j.
If bearings are to be replaced, go to step 4, c., if they are not, go to step 4, k.
Change 4 5-8.31(5-8 4 blank)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
