Explanation of Columns in Tool and Test Equipment Requirements,

TM 5-4120-393-14

B-3. Explanation of Columns in the MAC, Section II. (cont)

C ....................Operator or Crew

O ....................Unit Maintenance

F .....................Intermediate Direct Support Maintenance

H ....................Intermediate General Support Maintenance

D ....................Depot Maintenance

e. Column 5, Tools and Equipment. Column 5 specifies, by code, those common tool sets (not individual tools)

and special tools, TMDE, and support equipment required to perform the designated function.

f. Column 6, Remarks This column shall, when applicable, contain a letter code in alphabetical order which shall

be keyed to the remarks contained in Section IV.

B-4. Explanation of Columns in Tool and Test Equipment Requirements, Section III.

a. Column 1, Reference Code. The tool and test equipment reference code correlates with a code used in the

MAC, Section II, Column 5.

b. Column 2, Maintenance Category.

The lowest category of maintenance authorized to use the tool or test

equipment.

c. Column 3, Nomenclature. Name or identification of the tool or test equipment.

d. Column 4, National Stock Number. The National stock number of the tool or test equipment.

e. Column 5, Tool Number. The manufacturer's part number.

B-5. Explanation of Columns In Remarks, Section IV.

a. Column 1, Reference Code. The code recorded in column 6, Section II

b. Column 2, Remarks This column lists information pertinent to the maintenance function being performed as

indicated in the MAC, Section II.

B-3