Chapter 4: ORGANIZATIONAL MAINTENANCE INSTRUCTIONS

TM 5-4130-234-13&P

CHAPTER 4

ORGANIZATIONAL MAINTENANCE INSTRUCTIONS

Section I. SERVICE UPON RECEIPT OF MATERIAL

e. Close valve (161) while service unit is being used

4-1.

Inspecting and Servicing the Equipment

or in storage. Open valve only when service unit is being

a. Inspect the outer surfaces of service unit for dents

shipped by air.

or other evidence of mishandling.

b. Inspect all gages, scale, and beaker for broken

glass and for bent or broken pointers in gages.

4-2.

Installation

c. Inspect all accessories (1 thru 13, fig. 5-2) for

a. Position service unit in area that will allow

condition.

enclosure door to swing 180 degrees and provide

d. Check that vacuum pump oil level is within glass

connection for facility electrical power.

window.

Section II. REPAIR PARTS, SPECIAL TOOLS, AND EQUIPMENT

4-3.

Special Tools and Equipment

4-4.

Maintenance Repair Parts

a. No special tools and equipment are required.

a. Repair parts are listed and illustrated in Appendix

Section III. LUBRICATION INSTRUCTIONS

4-5.

Lubrication

Refer to Chapter 3, Section I for lubrication instructions for

the vacuum pump.

4-1