Maintenance Code - TM-5-4130-234-13-P0041

TM 5-4130-234-13&P

(3) Recoverability Code. Recoverability codes are

NOTE

Cannibalization or salvage may be used as a

assigned to support items to indicate the disposition

source of supply for any items source coded

action on unserviceable items. The recoverability code

above except those coded XA OR XD.

is entered in the fifth position of the Uniform SMR Code

(2) Maintenance Code. Maintenance codes are

format as follows:

assigned to indicate the levels of maintenance

Recoverability

Codes

Definition

authorized to use and repair support items. The

Nonreparable item. When unserviceable, condemn

maintenance codes are entered in the third and fourth

and dispose at the level indicated in position 3.

positions of the Uniform SMR Code format as follows:

O Reparable item. When uneconomically reparable,

(a) The maintenance code entered in the third

condemn and dispose at organizational level.

position will indicate the lowest maintenance level

Reparable item. When uneconomically reparable,

condemn and dispose at the direct support level.

authorized to remove, replace, and use the support

H Reparable item. When uneconomically reparable,

item. The maintenance code entered in the third position

condemn and dispose at the general support

will indicate one of the following levels of maintenance:

level.

D Reparable item. When beyond lower level repair

Code

Application/Explanation

capability, return to depot. Condemnation and

C Crew or operator maintenance performed within

disposal not authorized below depot level.

organizational maintenance.

Reparable item. Repair, condemnation, and

O Support item is removed, replaced, used at the

disposal not authorized below depot/specialized

organizational level.

repair activity level.

Support item is removed, replaced, used by the

A Item requires special handling or condemnation

direct support element of integrated direct

procedures because of specific reasons (i.e.,

support maintenance.

precious metal content, high dollar value,

Support item is removed, replaced, used at the

critical material or hazardous material). Refer to

direct support level.

appropriate manuals/directives for specific

H Support item is removed, replaced, used at the

instructions.

general support level.

c. Federal Stock Number. Indicates the Federal

Support items that are removed, replaced, used at

stock number assigned to the item and will be used for

depot, mobile depot, specialized repair activity

requisitioning purposes.

only.

d. Part Number. Indicates the primary number used

NOTE

Codes "I" and "F" will be considered the same by

by the manufacturer which controls the design and

direct support units.

characteristics of the item by means of its engineering

(b) The maintenance code entered in the

drawings, specifications standards, and inspection

fourth position indicates whether the item is to be

requirements to identify an item or range of items.

repaired and identifies the lowest maintenance level

NOTE

with the capability to perform complete repair (i.e., all

When a stock numbered item is requisitioned, the repair part

authorized maintenance functions ). This position will

received may have a different part number than the part being

contain one of the following maintenance codes:

replaced.

e. Federal Supply Code for Manufacturer (FSCM).

Code

Application/Explanation

The FSCM is a 5-digit numeric code listed in SB 708-42

O The lowest maintenance level capable of complete

which is used to identify the manufacturer, distributor, or

repair of the support item is the organizational

Government agency, etc.

level.

f. Description. Indicates the Federal item name and,

The lowest maintenance level capable of complete

if required, a minimum description to identify the item.

repair of the support item is the direct support

Items that are included in kits and sets are listed below

level.

H The lowest maintenance level capable of complete

the name of the kit or set with the quantity of each item

repair of the support item is the general support

in the kit or set indicated in the quantity incorporated in

level.

unit column. When the part to be used differs between

D The lowest maintenance level capable of complete

serial numbers of the same model, the-effective serial

repair of the support item is the depot level.

numbers are shown as the last line of the description. In

Repair restricted to designated specialized repair

the Special Tools List, the initial basis of issue (BOI)

activity.

Nonreparable. No repair is authorized.

appears as the last line in the entry for each special tool,

B No repair is authorized. The item may be

TMDE, and support equipment. When density of

reconditioned by adjusting, lubricating, etc., at

equipments sup

the user level. No parts or special tools are

procured for the maintenance of this

item.

C-2