|
| |
TM 55-8145-221-14&P
0026 00-1
RECORDER THERMOMETER REPLACEMENT
0026 00
THIS WORK PACKAGE COVERS:
Removal and Installation
INITIAL SET-UP:
MAINTENANCE LEVEL
Unit
Tools:
Material/Parts:
General Mechanics Toot Kit (Section III, Item 1, WP 0048 00)
Washer, Lock (Item 26, WP 0081 00)
REMOVAL.
1. Remove two screws (1) from sensing element (2).
CAUTION
To prevent damage to sensing element, do not bend or kink element tubing.
2. Separate sensing element (2) from recording thermometer (3).
3. Remove four nuts (4) and star washers (5) from back of shock mounts (6).
4. Remove recording thermometer (3) from frame (7).
5. Remove four nuts (8), star washers (9), and shock mounts (6) from recording thermometer (3).
INSTALLATION.
1. Install four shock mounts (6), star washers (9), and nuts (8) on recording thermometer (3).
2.
Install recording thermometer (3) on frame (7) and secure with four star washers (5) (Item 26, WP 0081 00) and nuts (4).
3. Position sensing element (2) on recording thermometer (3) and install two screws (1).
4.
Adjust recording thermometer (3) (WP 0025 00).
|
