|
| |
TM 55-8145-221-14&P
0028 00-2
POWER CORD – Continued
0028 00
REPAIR.
Replace defective components.
ASSEMBLY.
1.
Connect wires (15) to terminal block (13). Tighten four screws (16). Remove tags.
2.
Align guide pin on terminal (13) with slot on front housing (14) and push block into housing.
3.
Install two screws (12).
4.
Install rear housing (11) and secure with four nuts (10), three flat washers (8), cap retaining clip (9), four lock washers
(7), and four screws (6).
5.
Install rubber grommet (5) up against rear housing (11).
6.
Install compression nut (4) and tighten locking screw (3).
7.
Tighten two screws (1) securing clamp (2).
END OF WORK PACKAGE.
FRONT VIEW
9
6
14
13
16
15
11
10
12
6
BLACK
GREEN
RED
WIRE CONNECTIONS
WHITE
7
7
8
5
2
3
2
4
1
17
1
Power Cord
|
