|
| |
TM 55-8145-221-14&P
0032 00-4
LIGHT ASSEMBLY (INTERIOR) – Continued
0032 00
ASSEMBLY.
1.
Slide two conduit nuts (1, Figure 3) over conduit (2 and 3).
2.
Install conduits (2 and 3) into union (4) and secure with two conduit nuts (1).
3.
Route wiring (5) through conduits (2 and 3).
4.
Slide conduit nut (6) over conduit (2).
5.
Route wiring (5) protruding from conduit (2) through front panel (7), install conduit (2) into adapter (8) and tighten
conduit nut (6).
6.
Install seven clamps (9) and screws (10) to secure conduits (2 and 3).
7.
Slide conduit nut (11) over conduit (3).
8.
Install two conduit lock nuts (12) on conduit (13).
9.
Install conduit (13) on electrical box (14) and switch box (15).
10. Install adapter (16) in electrical box (14).
11. Align electrical box (14) and switch box (15) with mounting holes on container (7). Adjust boxes until they align with
mounting holes; tighten two conduit locking nuts (12).
12. Route wiring (5) into electrical box (14); install electrical box on conduit (3) and tighten conduit nut (11).
13. Install two screws (18) to secure electrical box (14) and two screws (19) to secure switch box (15).
14. Route wiring (20) through electrical box (14) into switch box (15).
15. Connect wiring (20) to switch (21) (reference Wiring Schematic, figure 2).
16. Install gasket (22), switch (21) and two screws (23).
17. Connect wiring (5 and 20) and fixture (24) using three wire nuts (25) (reference Wiring Schematic, figure 2).
18. Install fixture (24, figure 3) and two screws (26).
19. From outside the container (17), connect wiring (5) using three wire nuts (27) (reference Wiring Schematic, figure 2).
20. Install gasket (28, figure 3), cover (29) and two screws (30).
INSTALLATION.
1.
Install bulb (31) into fixture (24).
2.
Install globe (32) and guard (33) on fixture (24) and tighten screw (34).
3.
Close right rear door (35).
|
