|
| |
TM 55-8145-221-14&P
0043 00-10
SIDE PANEL REPLACEMENT – Continued
0043 00
INSTALLATION – Continued.
14. Position angle plate (9, figure 2) against side panel (1) and front panel (14) and install seven liner rivets (15) (Item 12,
WP 0081 00), securing angle plate to front panel.
15. Using angle plate (9) as a template, drill seven .187 diameter holes into side panel (1)
16. Install seven liner rivets (15) (Item 12, WP 0081 00) in angle plate (9).
17. Position angle plate (10) against side panel (1) and install fourteen screws (16).
18. Using angle plate (10) as a template, drill two .197 diameter holes in side panel (1) and install two pop rivets (13) (Item
23, WP 0081 00).
19. Using angle plate (10) as a template, drill thirteen .172 diameter holes into side panel (1).
20. Install thirteen bolts (17) in angle plate (10).
21. Apply a bead of sealant (Item 3, WP 0078 00) along edges and seams of angle plates (7, 8, 9 and 10).
22. Install roof panel (reference WP 0045 00).
23. Remove eleven button plugs (18) from angle plates (7, 8, 9 and 10) and fill voids between side panels (1) and front panel
(14) and floor panel (6) with urethane foam (Item 8, WP 0078 00). Install button plugs; seal around each plug with
sealant (Item 3, WP 0078 00).
|
