| |
TM 55-8145-221-14&P
Change 1
0006 00-12
OPERATION UNDER USUAL CONDITIONS Continued
0006 00
OPERATING PROCEDURES Continued.
REFRIGERATION UNIT STARTING PROCEDURE (Figure 9).
1.
Place the circuit breaker handle (1) in the ON position.
2.
Place the START/RUN, OFF switch (2) in the START/RUN position.
NOTE
Temperature inside the refrigerated container may take up to five hours to reach selected
thermostat setting.
3.
Close control panel access door (3).
CAUTION
Care should be taken that while generator set is being returned to its stored position,
electrical cables and fuel hose are clear and not restricted.
4.
With another person, release the Generator Set slide lock clamps (1, figure 9) and push unit (2) back into its stored
position. Verify slide locks snap closed. Reinstall the two slide retaining bolts (3).
Figure 9. Refrigeration Unit Operation Procedures
2
3
1
|