REMOVE/INSTALL ADJUST SAFETY LATCH STRIKE.

TM 9-4110-241-13

TO 35E9-274-1

4-13. REMOVE/INSTALL ADJUST SAFETY LATCH STRIKE.

a. Tools: Screwdriver, cross-tip.

Figure 4-8. Latch Strike

b. Removal:

(1) Remove screws.

(2) Remove strike.

c. Installation:

(1)

Position strike on refrigerator.

(2)

Insert screws through strike and into refrigerator. Do no tighten.

(3)

Close door to ensure that latch engages properly.

(4)

Tighten screws.

(5)

Check gasket around door to be sure it is sealing properly.

d. Adjust:

(1) Loosen two adjusting screws.

(2) Slide to adjust.

(3) Tighten two adjusting screws.

4-28