REMOVE/INSTALL DOOR GASKET.

TM 9-4110-241-13

TO 35E9-274-1

4-17. REMOVE/INSTALL DOOR GASKET.

a. Tools and Material:

App. E

Figure 4-12. Door Gasket

b. Removal:

(1) (Models M600PF, M1200PFA, and M4000PF). Remove screws holding retainer strips and remove retainer

strips.

(2) Remove and discard damaged gasket.

(3) Remove all staples from gasket mounting area around door.

c. Installation:

(1) Begin installing new gasket on the bottom, hinge side of the door using tacks (App. E, Item 6) to mount the

gasket.

(2) Gasket must be installed as a continuous strip around door and end at the bottom hinge side of the door. Cut

excess after tacking end into place.

(3) (Models AA600PF, M1200PFA, and AA4000PF). Install retainer strips back in place with screws. Replace

retainer strips if damaged.

4-32