|
| |
TM 9-4110-257-14
4-36.
TEMPERATURE SWITCH S3 REPLACEMENT. - Continued
b.
Installation.
(1)
Install temperature switch (1), slide two clamps (4) over switch, and tighten nuts (3).
(2)
Install new tab housing (5) and tab (2) onto each temperature switch (1) wire lead (para 4-20).
(3)
Using tags and wiring diagram (fig. 1-4), connect tabs (2). Remove tags.
(4)
Install any insulation that was removed and wrap with insulation tape as necessary.
NOTE
FOLLOW-ON MAINTENANCE:
Install evaporator coil guard (para 4-18).
Connect battery (para 4-35) and put unit back into service.
4-92
|
