|
| |
TM 9-4110-257-14
b. Installation.
NOTE
Terminal hardware is supplied with starting motor.
(1) Using tag and wiring diagram (fig. 1-4), install wire lead (8), lock washer (10), and nut (9). Remove tag.
(2) Using tags and wiring diagram (fig. 1-4), install wire leads (5), flat washer (7), and nut (6). Remove tags.
(3) Using tag and wiring diagram (fig. 1-4), connect wire lead (4). Remove tag.
(4) Install starting motor (3), two flat washers (2), and screws (1).
NOTE
FOLLOW-ON MAINTENANCE:
Close front bottom doors.
Connect battery (para 4-35) and put unit back into service.
4-133
|
