|
| |
TM 9-4110-257-14
b. Installation.
(1) If bracket (14) was removed, install bracket, two flat washers (17), new lock washers (16), and bolts (15).
(2) If fuel filter cover (13) was removed, install fuel filter cover, two bolts (12), and nuts (11). Install eye (5) per
following procedures.
Figure 4-49. Fuel Filter
NOTE
The following procedures apply to both eyes.
(3) If eye (5) was removed, install it.
(a) Install new washer (10), eye (5), new washer (9), and union (8).
(b) Install hose (7), and tighten clamp (6).
(4) If union (4) was removed, install it.
(5) Install new small seal (3), new large seal (2), and new fuel filter element (1).
NOTE
FOLLOW-ON MAINTENANCE:
Close left side condenser door.
Connect battery (para 4-35) and put unit back into service.
4-135
|
