|
| |
TM 9-4110-257-14
4-58. GLOW PLUG TESTING AND REPLACEMENT.
This task covers:
a.
Testing
b.
Removal
c.
Installation
INITIAL SETUP:
Materials/Parts:
Equipment Conditions:
Marker tag
Refrigeration unit shut down (para 2-7) and battery
7, Appendix E
disconnected (para 4-35).
Left side condenser door open.
a. Testing.
(1) Tag wire lead (1).
(2) Remove nut (2) and wire lead (1).
(3) Using multimeter set to measure resistance, check glow plug (3) continuity between terminal and base of
glow plug. Continuity should be indicated. If no continuity was indicated, replace glow plug.
b. Removal.
(1) Remove nut (2) and wire lead (1).
(2) Remove glow plug (3).
4-138
|
