|
| |
TM 9-4110-257-14
(2) Remove six screws (3), lock washers (4) and neck fuel tank filler (5). Discard lock washers.
(3) Drain fuel tank (6) (para 4-7) and remove shut-off cock (7).
b.
Installation.
(1) Install shut-off cock (7) into tank (6).
(2) Install neck fuel filler (5), new lock washers (4), and six screws (3).
(3) Latch chain (2) to neck fuel tank filler (5) and install cap (1).
(4) Fill tank (6) with appropriate type and quantity fuel (para 4-7).
NOTE
FOLLOW-ON MAINTENANCE:
Close left side condenser door.
Connect battery (para 4-35) and put unit back into service.
4-159
|
