| |
TM 9-4110-257-14
5-18.
RECEIVER REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Materials/Parts:
Self Locking Nuts (2)
15, Appendix G
Lubricating Oil
21, Appendix E
Teflon Seals (2)
47, Appendix G
Equipment Conditions:
Refrigeration system discharged (para. 5-7).
Both side condenser doors open.
General Safety Instructions:
WARNING
Compressor lubricating oil used in this refrigeration system is caustic.
Wear gloves and a face protector or safety glasses in any situation
where skin or eye contact is possible. If oil does contact skin, wash with
soap and water.
a.
Removal.
(1) Remove two isolation valve caps (1).
(2) Loosen two flare nuts (2) and move copper tubing (3) away from isolation valve (4) being careful not to bend or
kink tubing.
Figure 5-14. Receiver
5-39
|