|
| |
TM 9-4110-257-14
5-39. NOZZLE SERVICING, TESTING AND REPLACEMENT. - Continued
c.
Installation.
NOTE
The following procedures apply to both nozzles.
(1)
If removed, install stud (6).
NOTE
The nozzle assembly uses special washers as spacers/seals. The
washers are not re-usable and must be replaced with the same quantity
and thickness washers removed.
The mounting brace is beveled to cup the bevel on the mating washer.
(2)
Install new washer(s) (4) as noted during removal, nozzle (3), brace (5) with bevel up, washer (2) with bevel
down, and nut (1). Torque nut to between 27 and 31 ft lb (37 and 42 Nm).
NOTE
FOLLOW-ON MAINTENANCE:
Install fuel supply tube onto nozzle (para 4-59).
Install fuel return hose onto nozzle (para 4-60).
Install engine (para 5-46).
5-86
|
