|
| |
TM 9-4110-257-14
5-41. FUEL PUMP REPLACEMENT. - Continued
Figure 5-37. Fuel Pump
CAUTION
The fuel pump uses special gaskets as shims/seals. The quantity and
thickness of gaskets is important to prevent damage to the fuel pump.
NOTE
Gasket thickness is either 0.008 in. (0.2 mm) or 0.040 in. (1.0 mm).
(3)
Install new gasket(s) (7) as noted during removal. Measure the distance from the gasket(s) surface to the end of
tappet (8). Increase or decrease gaskets to attain a distance between 0.045 in. and 0.067 in. (1.3 mm and 1.7
mm).
(4)
Install fuel pump (6) and two nuts (5).
(5)
Install two new washers (4), eyes (3), new washers (2), and unions (1).
NOTE
FOLLOW-ON MAINTENANCE:
Close left side condenser door.
Connect battery (para 4-35) and put unit back into service.
5-94
|
