|
| |
TM 9-4110-257-14
b. Installation.
(1) Install alternator coil (9) and secure with four screws (8).
(2) Route alternator coil (9) leads as necessary and install two safety plates (5), flat washers (4), and
screws (3).
(3) Using tags and wiring diagram (fig. 1-4), connect wire leads (6) with splices (7) (para 4-20). Remove tags.
(4) Install alternator magnet (2) and secure with five screws (1).
NOTE
FOLLOW-ON MAINTENANCE:
Install flywheel (para 5-44).
5-105
|
