|
| |
TM 9-4110-257-14
5-47. FUEL TANK REPLACEMENT.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP:
Materials/Parts:
Equipment Conditions:
Self Locking Nuts (4)
Engine removed (para 5-46).
15, Appendix G
Compressor removed (para 5-38).
Lock Washers (4)
Sending unit removed (para 4-64).
7 Appendix G
Fuel supply and return hoses with inlet elbows
Webbing Fabric (2)
removed from fuel tank (para 4-59, 4-60).
Figure F-5, Appendix F
Fuel tank filler neck and shut-off cock removed
(para 4-65).
a. Removal.
(1) Remove four self locking nuts (1) and base (2). Discard self locking nuts.
(2) Remove four bolts (3), lock washers (4), fuel tank strap (5) and fabric webbing (6). Discard lock washers
and fabric webbing.
(3) Remove fuel tank (7).
b. Installation.
(1) Install fuel tank (7).
(2) Install new fabric webbing (6), fuel tank strap (5), four new lock washers (4) and bolts (3).
(3) Install base (2) onto four isolator mounts (8). Install four new self locking nuts (1).
NOTE
FOLLOW-ON MAINTENANCE:
Install fuel tank filler neck and shut-off cock (para 4-65).
Install fuel supply and return hoses with inlet elbows onto fuel tank (para 4-59, 4-60).
Install sending unit (para 4-64).
Install compressor (para 5-38).
Install engine (para 5-46).
5-109
|
