|
| |
TM 9-4110-257-14
Table 4-1. Unit Preventive Maintenance Checks and Services for Model F10000RD - Continued
Location
Item
Item to
Not Fully Mission
No.
Interval
Check/
Procedure
Capable if:
Service
17-
(3) Attach grease gun nozzle to grease fitting
Cont
and pump handle until grease just begins
coming out around bearing.
(4) Remove grease gun nozzle and wipe away
excess grease with a clean rag.
b.
Inspect flange bearings for loose or missing
mounting hardware and looseness of fan
drive shaft in bearing. If loose, tighten or
replace it as necessary (para 4-44).
18
Monthly
Condenser
a.
Remove evaporator air outlet guard
Fan is cracked, torn, or
and
(para 4-17).
loose.
Evaporator
Fans
b.
Inspect fans for cracks and tears. Inspect for
loose connection to fan drive shaft. If loose,
tighten to shaft. If damaged, replace
(para 4-39, 4-40).
c.
Install evaporator air outlet guard
(para 4-17).
4-23
|
