|
| |
TM 9-4120-360-24P
(2) FIG. Column. This column Iists the number of the figure where the item is identified/located. The
figures are in numerical order in Section II and Section Ill.
(3) ITEM Column.
The item number identifies the item associated with the figure listed in the adjacent
FIG. column. This item is also identified by the NSN listed on the same line.
b. PART NUMBER INDEX. Part numbers in this index are listed by part number in ascending alpha-
numeric sequence (i e., vertical arrangement of letter and number combination which places the first letter
or digit of each group in order A through Z, followed by the numbers O through 9, and each following letter
or digit in like order).
(1) CAGEC Column. The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric
code used to identify the manufacturer, distributor, or Government agency/activity that supplies the item.
(2) PART NUMBER Column. Indicates the primary number used by the manufacturer (individual,
firm, corporation, or Government activity), which controls the design and characteristics of the item by means
of its engineering drawings, specifiations, standards, and inspection requirements to identify an item or
range of items.
(3) STOCK NUMBER Column. This column lists the NSN for the
associated part number and
manufacturer identified in the PART NUMBER and CAGEC columns to the left.
(4) FIG. Column. This column lists the number of the figure where the item is identifiedhcated in
Section II and Section Ill.
(5) ITEM Column. The item number is that number assigned to the item as it appears in the figure
referenced in adjacent figure number column.
c. FIGURE AND ITEM NUMBER INDEX.
(1) FIG, Column. This column lists the number of the figure where the item is identified/located in
Section II and Section Ill.
(2) ITEM Column. The item number is that number assigned to the item as it appears in the figure
referenced in the adjacent figure number column.
(3) STOCK NUMBER Column. This column lists the NSN for the item.
(4) CAGFC Column. The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric
code used to identify the manufacturer, distributor, or Government agency/activity that supplies the item.
(5) PART NUMBER Column. Indicates the primary number used by the manufacturer (individual,
firm, corporation, or Government activity), which controls the design and characteristics of the item by means
of its engineering drawings, specifications, standards, and inspection requirements to identify an item or
range of items.
SPFCIAL INFORMATION
a. USABLE ON CODE. The usable on code appears in the lower left comer of the Description Col-
umn heading. Usable on codes are shown as “UOC:..” in the Description Column (justified left) on the last
line of the applicable item desctiption/nomenclature. Unccded items are applicable to all models.
b. FABRICATION INSTRUCTIONS. Bulk materials required to manufacture items are listed in the
Bulk Material Functional Group of this RPSTL. Part numbers for bulk materials are also referenced in the
description column of the line entry for the item to be manufactured/fabricated. Detailed fabrication instruc-
tions for items source coded to be manufactured or fabricated are foundinTM9-4120-360-14.
c. INDEX NUMBERS. Items which have the word BULK in the figure column will have an index num-
ber shown in the item number column. This index number is across-reference between the National Stock
Number/Part Number Index and the bulk material list in Section Il.
d. ASSOCIATED PUBLICATION.The publications listed below pertain to the Air Conditioner, 18,000
BTU/HR and its components.
Short Title
TM 9-4120-360-14
Operator’s, Unit, DS and GS Maintenance Manual
5
Publication
|
