|
| |
TM 9-4120-367-14
TM 07592B-14/1
Location/Item
Action
Remarks
Removal
e. Separate the mounting plate from the mounting
- Continued
frame assembly.
f. Loosen setscrew in knob to pull knob from switch
shaft.
g. Remove switch nut and washer.
Discard nut and washer. New
nut and washer included with
new switch.
h. Tag and pull “quick disconnects” from switch.
Testing
See table 4-3, Step 7.
Installation
a. Push "quick disconnect" terminals onto switch
terminals.
b. Slip switch into the mounting plate.
c. Install switch nut and washer.
Supplied with switch.
d. Assemble control module.
e. Slide control module into juntion
.
box.
f. Turn connector knob to the right (about five full
turns).
g. Connect power supply.
5.11 MODE SWITCH S1. - Continued
5 - 3 4
|
