|
| |
TM 9-4120-367-14
TM 07592B-14/1
Location/Item
Removal
- Continued
Installation
Action
c.
d.
e.
g.
a.
b.
Pull control module from junction box. Use care to
avoid breaking sensing line.
Remove four screws to pull cover from control
module frame.
Remove four screws to separate mounting plate
assembly from mounting frame assembly.
Remove screws, washers and nuts to separate
connector from mounting frame assembly.
Tag and unsolder wires from connector.
Slide heat-shrink tubing over wires.
Solder wires to connector. See figures FO-1,
FO-3, FO-5, FO-7, or FO-9.
Single-Phase Model F18H
X25A16V
X26A16V
X14A16V
X27A20V
X28A20V
X16A16V
X15A16V
X17A16V
X18A16V
X1D12V,
X1G16V
X2D12V,
X2F16V
Blank
X19A12V
X23A12V
Blank
1
2
3
4
5
6
7
8
9
11
12
13
14
15
16
Remarks
Figure FO-1 for F18H, figure
FO-3 for F18H-3, figure FO-3
or K1F-18H-4, figure FO-7 for
F18H-3A and F18H-4A, and
figure FO-9 for MHP-20-4-08.
5-52
5.16 CONNECTOR P2. - Continued
Wire No.
P2A Terminal
Sensing line connects TEM-
PERATURE SELECTOR to
sensing bulb.
|
