|
| |
TM 9-4120-367-14
TM 07592B-14/1
Location/Item
Cleaning
Continued
Figure 5-21. Return Air Filter
Action
a.
b.
c.
d.
Dry cleaning solvent (Federal specification
P-D-680) used to clean parts is potentially
dangerous to personnel and property. Do
not use near open flame or excessive
heat. Flash point of solvent is 100°F to
138°F (38°C to 59°C).
Immerse the filter in detergent solution or dry
cleaning solvent (Federal Specification P-D-680).
Agitate until dirt is removed, using a soft brush if
necessary to loosen caked on dirt.
Rinse in clear water or clean dry cleaning solvent.
Drain, then hold filter horizontal and tap each edge
on bench or floor to dislodge droplets.
Remarks
5.20 AIR FILTER. - Continued
5-63
|
