|
| |
TM 9-4120-367-14
TM 07592B-14/1
6.9 COMPRESSOR. - Continued
Location/Item
Installation
Figure 6-8. Compressor Replacement
Action
a.
b.
c.
If compressor is being replaced due to
motor burnout, decontaminate system.
Nitrogen purge both high and low sides of sys-
tem.
Perform previous “Cleanup Procedures” located
in this paragraph.
Inspect removed washers and bushings; use new
if they are deformed or worn.
Remarks
Failure to follow caution will
result in failure of new com-
pressor.
Paragraph 6.5
For burnout only.
6-34
|
