|
| |
TM 9-4120-367-14
TM 07592B-14/1
6.14 DRIER/FILTER (DEHYDRATOR). This task covers removal, cleaning, inspection and installation.
INITIAL SETUP
Applicable Configurations:
All
Test Equipment:
None
Special Tools:
None
Materials/Parts:
Charging Manifold
Safety Glasses
Solvent P-D-680
Detergent Solution
Cleaning Cloths
Refrigerant R-22
Nitrogen (Cylinder)
Tools (Paragraph 3.1)
Scale
Gloves
Equipment Descriptions:
Power OFF; removed from shelter
Special Environmental Conditions:
None
General Safety Instructions:
See WARNING page
References:
None
Troubleshooting References:
None
Personnel Required:
Direct Support
Location/Item
Removal
Installation
Action
a.
b.
c.
d.
a.
b.
c.
Discharge refrigerant.
Remove top covers.
Remove four screws and two straps.
Disconnect drier tube from refrigerant lines.
Nitrogen purge system.
Connect drier to tubing.
Install two straps.
Remarks
Paragraph 6.4
Paragraph 6.4
6-47
|
