|
| |
TM 9-4120-367-14
TM 07592B-14/1
6.22 ACTUATING CYLINDER. - Contiued
Location/Item
Action
Remarks
Removal
a. Release entire refrigerant charge.
Paragraph 6.4
b. Remove top cover.
c. Disconnect refrigeration tubing from actuating
cylinder by loosening flare nut.
d. Loosen two bolts holding pivot bracket. Remove
center screw, washers, pivot arm, and bearing
insert from pivot bracket.
e. Remove two nuts, washers, and actuating cylin-
der from bracket. Inspect actuating cylinder and
replace if damaged.
Installation
a. Secure actuating cylinder to bracket with two
nuts and washers.
b. Install bearing insert pivot arm, washers, and
screw onto pivot bracket. Tighten two bolts hold-
ing pivot bracket.
c. Connect refrigeration tubing to actuating cylinder
and tighten flare nut.
d. Replace dehydrator.
e. Install condenser guard.
6-74
|
