|
| |
TM 9-4120-367-14
TM 07592B-14/1
6.30 MOTOR. This task covers disassembly, cleaning, inspection and assembly.
Applicable Configurations:
Model MHP-20-4-08
Test Equipment:
None
Special Tools:
None
Materials/Parts:
Safety Glasses
Solvent P-D-680
Detergent Solution
Cleaning cloths
Tools (paragraph 3.1)
Abrasive Cloth
Gloves
Equipment Descriptions:
Power OFF; removed from shelter
Special Environmental Conditions:
None
General Safety Instructions:
See WARNING page
References:
None
Troubleshooting References:
None
Personnel Required:
Direct Support
Location/Item
Disassembly
Disassembly
Action
a.
b.
c.
d.
e.
f.
g.
a.
b.
c.
EVAPORATOR MOTOR
Remove four screws from both end brackets
(rovers).
Remove both end brackets (covers).
Remove four screws securing bearing retainer.
Remove bearing retainer.
Remove load spring, washers, and bearings.
Remove rotor with shaft.
Tag and disconnect leads and remove cable.
CONDENSER MOTOR
Remove four screws from both end brackets
(covers).
Remove both end brackets (covers).
Remove bad spring, washers, and bearings.
Remarks
6-107
|
