|
| |
TM 0-4120-367-14
TM 07592B-14/1
Location/Item
Action
Remarks
CONDENSER MOTOR
Assembly
a. Coat the shaft surfaces of the rotor and load
springs with oil (MIL-L-2104, Grade 20).
b. Slide both bearings on shaft ends.
c. Slide load springs and washers onto shaft ends.
d. Slip rotor with shaft into frame with stator.
e. Place end brackets on shafts and aline mounting
holes.
f. Tighten screws in end brackets evenly while
cheking rotor for freedom of rotation. There
should be no drag.
NOTE: For further information on electric motor repair, refer to FM 20-31 (Electric Motor and Generator Repair).
6-111/(6-112 blank)
6.30 MOTOR. -Continued
|
