|
| |
ARMY TM 9-4120-381-14
NAVY EE-000- CA-MMA-01 0/7053-AC
AIR FORCE TO 35E9-136-31
4-29. FRONT SERVICE VALVE PANEL-Continued.
Figure 4-33. Front Service Valve Panel
REPAIR/REPLACE
1.
Insulation.
a. Cut and remove damaged section of insulation (3).
WARNING
Acetone and Methyl-Ethyl Ketone (MEK) are flammable and their vapors can be explosive.
Repeated or prolonged skin contact or inhalation of vapors can be toxic. Use a well ventilated area,
wear gloves, and keep away from sparks or flame.
b.
Clean area for new insulation, using acetone or MEK and a stiff brush.
c.
Cut replacement insulation to fit.
d.
Coat surfaces of metal and insulation with adhesive. Let both surfaces dry until adhesive is tacky but will not
stick to fingers.
e. Starting with an end, carefully attach insulation to metal surface. Press into firm contact all over.
2.
Captive Fastener.
a.
Remove split ring retainer (8), fastener (11), ejector spring (10), and thermoplastic wear washer (9).
b.
Install ejector spring (10), thermoplastic wear washer (9), fastener (11), and split ring retainer (8).
4-54
|
