|
| |
ARMY TM 9-4210-381-14
NAVY EE-000-CA-MMA-010/7053-AC
AIR FORCE TO 35E9-136-31
4-35. THERMOSTAT BRACKET.
This task covers:
Inspection
Removal
Repair/Replace
Installation
INITIAL SETUP:
Tools
Tool kit, service, refrigeration unit (Item 1, Appendix B)
Electric portable drill (Item 6, Appendix B)
Twist drill set (Item 7, Appendix B)
Riveter (Rivnut) (Item 9, Appendix B)
Personnel: 1
Equipment Conditions:
WARNING
Disconnect input power to the air conditioner before performing any internal maintenance. Voltages
used can KILL. Shutting the unit off at the control panel does not disconnect unit power.
1.
Disconnect air conditioner input power at source.
2.
Remove left front evaporator panel (para 4-23).
INSPECTION
1.
Check that bracket (2) is not cracked or punctured (see Figure 4-38).
2.
Check for damaged or missing rivnuts or missing mounting hardware.
REMOVAL
1.
Remove low ambient temperature thermostat (para 4-86).
2.
Remove three screws (3), lockwashers (4), and flat washers (5).
3.
Remove bracket (2).
REPAIR/REPLACE
Repair consists of replacing damaged or missing rivnuts (1), or bracket.
INSTALLATION
1.
Position bracket (2) in place.
2.
Install three lockwashers (4), flat washers (5), and screws (3).
3.
Install low ambient temperature thermostat (para 4-86).
FOLLOW ON PROCEDURE
1.
Install left front evaporator panel (para 4-23).
2.
Connect air conditioner input power at source.
4-66
|
